Nanjing Moyi Import & Export Co., Ltd.

home products auto parts bus door system

bus door system

Product Details:

Certification iso9000/TS16949
Place of Origin Jiangsu, China

Detailed Product Description


 

SG300 Slide-Glide door system is mainly used as the transit bus entrance and exit door. The merits of it including security, synchronization, reliability, maintainability and testability

This instruction states mainly based on SG300 dual door panel system. Other models are same as this, except dimension parameter and mechanical installation size. (except the special requirement of user)

 

Quality Three Guarantees and after sales service instruction 

 

Preface

Firstly, thanks for choosing our company products SG300 Slide-glide door system. Hope it can meet you using request smoothly. Our products all have been inspected and tested strictly before sales. If you still have some questions, please contact us ,We will do our best to server for you.

our products quality guarantee period : one year after sales.

1         we assure to our customer that we will repair or replace all the defected parts if the defection is caused by material or defection when making, the period will be one year after sales.

Main technical parameter:

1.          Operation Temperature-40ºC+60ºC

2.          Operation Pressure0.4Mpa0.8Mpa

3.          Operation VoltageDC12V or DC24V

4.          Driving force2000N0.7 Mpa

5.          Durability5x105times

 Common failure analysis and removing

Faliure

Removing

Opening or closing too fast

adjust the open and close  adjust screw to make sure the open and close speed suitable ,and fasten the screw

Operation works but no cushion

adjust the cushion screw to make sure the action has open and close cushion

Opening and closing too slow

air pressure is lower than 0.6~0.8Mpa

there is air leakage of pump body assembly

of the door,

should  inspect gradually

and replace the defected parts

Door light not turn out when the door closed

the toggle switch has not cut off the power

The seal between two door panel or between the edge of door panel and door frame does not tight.

loose the screw, adjust the upper and lower arm which is connected with the shaft stud .pull the door panel to make it work well with the seal and then fasten screw(except the welding part of the arm),adjust the guide roller off-center shaft to make it work well with the seal. The tightening nut on piston rod of the pneumatic cylinder is loose, double adjust the tightening screw nut.

After door closed completely, it open again automatically.

the toggle switch has not cut off the power

bus door system bus door system

Send your message to this supplier
« Prev Product 1 2 3 4 5 6 Next Product »

Other Products from this Supplier

See more bus door systembus sliding doorbus spares products from this supplier.

Company Info

Nanjing Moyi Import & Export Co., Ltd.
[China (Mainland)]
[Verified Member]

City: Nanjing
Province/State: Jiangsu
Country/Region : China (Mainland)

Business Type:Manufacturer, Trading Company, Agent

View Contact Details

Email this page Bookmark this page Print this Page